海角大神

Contact Us
Consult with an Expert
Contact Us
Consult with an Expert

海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩

Fluid Applied 海角大神ather Barrier for Commercial Wall Substrates Including CMU and Gypsum Sheathing

tyvek-fluid-applied-wb-product-logo-image1.jpg
tyvek-fluid-applied-wb-product-logo-image2.jpg
tyvek-fluid-applied-wb-product-logo-image3.jpg

海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩

Fluid Applied 海角大神ather Barrier for Commercial Wall Substrates Including CMU and Gypsum Sheathing

<br><b>海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩</b> is a fluid applied air a barrier protection engineered for the unique demands of heavy commercial construction projects. Based on a unique formulation using silyl-terminated polyether polymer technology, <b>罢测惫别办庐 Fluid Applied WB+鈩</b> offers low shrinkage during curing, superior elongation and recovery and can be easily applied in one coat.
 
 
 
 
 
 

Features & Benefits 

 
 
 

default-features-benifits.png
Ease of Installation
  • Single component, one-coat application.
  • Offers 2 to 3 times the coverage of competitive products.
  • Approximately 50 to 65 sq. ft./gallon in one coat, depending on substrate conditions (temperature and moisture), substrate porosity, and uniformity of application.
  • Spray or pressure roll for fast and easy application.
  • Exhibits low shrinkage during curing, helping to minimize the risk of cracking and pin-holing.
default-features-benifits.png
High Performance Durability
  • Not water soluble and will not wash off the wall when exposed to bulk water, even before curing.
  • Can be installed on damp surfaces, defined as when no moisture is transferred to the skin upon touching the substrate.
  • Cured membrane exhibits exceptional elongation and recovery properties.
  • When stretched, it acts like a rubber band, allowing the membrane to move with the building.
default-features-benifits.png
Temperature and UV Resistance
  • Withstands up to nine months (270 days) of UV exposure.
  • Installation temperature range 25 掳F (-4 掳C) to 140 掳F (60 掳C).
  • Maximum in-service temperature of 180 掳F (82 掳C).
  • Low VOC (25-30 g/l).
default-features-benifits.png
Air and Water Barrier Performance
  • Offers an ideal combination of air and water holdout with vapor permeability.
  • Exceeds ABAA, ASHRAE 90.1, and IECC air leakage requirements (ASTM E2357).
  • Water infiltration resistance up to 15psf when tested in accordance with ASTM E331.
  • Offers >90% drainage efficiency when tested in accordance with ASTM E2273.
  • Meets ASTM E2556, Type II standards for vapor permeable flexible sheet water-resistive barriers.
  • Shields insulation from drafts and minimizes air infiltration and exfiltration, enhancing HVAC efficiency.
  • Lowers energy consumption for heating and cooling, reducing costs.
  • Prevents damage to wood, metal, and mold growth.
  • Keeps insulation dry, maintaining its installed R-value.
 
 
 

Specifications

 
 
 

Standard Sizes

Unit Unit Size
Pail 5 Gallons
Drum 50 Gallons
 
 
 

Testing

<b>罢测惫别办庐 Fluid Applied WB+ </b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact your local 海角大神鈩 Tyvek Specialist before writing specifications around this product. Product properties are as follows:

TEST METHOD TEST TITLE PROPERTY RESULTS
AIR
ASTM E1677 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls Wall Assembly Air & Water Leakage Type 1
ASTM E2178 Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials Air Penetration Resistance .0002 cfm/ft2@ 75 Pa (1.57 psf)
ASTM E2357 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies Wall Assembly Air Penetration Resistance <0.0002 cfm/ft2@ 75 Pa
ASTM E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen Wall Assembly Air Penetration Resistance <0.0002 cfm/ft2@ 75 Pa
TAPPI T460 Air resistance of paper (Gurley method) Air Penetration Resistance >10,000 sec/100cc
ADHESION
ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants Adhesion - in - Peel Pass lbf/in.
(mortar)
ASTM D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds Peel Strength 13 Cohesive Failure
lbf/in (aluminum)
ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers Adhesion Strength - Exterior Gypsum (delaminates fiber glass top sheet) >25 psi
ASTM D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers Adhesion Strength - Concrete >33 psi
FIRE
NFPA 285 Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components Flame Propagation. Multiple Assemblies Pass
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials Surface Burning Characteristics Class A Index Flame Spread = 15
Smoke Developed = 10
STRENGTH
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers鈥擳ension Tensile Elongation at Break Recovery (held at 300% elongation) 140 psi
320 %
99 %
ASTM D2240 Standard Test Method for Rubber Property鈥擠urometer Hardness Hardness 34 Shore A
ASTM D1970 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection Nail Sealability Pass
No Leakage
WATER
AATCC 127 Test Method for Water Resistance: Hydrostatic Pressure Water Penetration Resistance >1000 cm
ASTM E96 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials Water Vapor Transmission 22 @ 25 mils thick Method B Perms
ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference Wall Assembly Water Penetration Resistance No Leakage
Tested to 15 psf
ASTM C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes VOC <2
25-30 % (by wt) g/L
GENERAL
ASTM D2369 Standard Test Method for Volatile Content of Coatings Solids 0.99
ASTM C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane Low Temperature Crack Bridging Pass
No Cracking at 25 mil Thickness
ASTM C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants Skin Over Time @ 50% R.H. and 70掳 F 1 to 2 hrs
 
 
 
 
 
 
 
 
 
 
 
 

Code Compliance

<b>罢测惫别办庐 Fluid Applied WB+鈩</b> complies with the following codes:

Code Description
US Product Listings & Verifications ASHRAE 90.1 and IECC air leakage requirements when tested in accordance with ASTM E2357.<br>AC 212 Acceptance Criteria for Water Resistive Barriers over Exterior Sheathing<br>IBC, Section 1403.2 , 1405.4.
 
 
 
 
 
 
 
 
 
 
 
 

FAQ

Can continuous insulation be applied directly over cured 罢测惫别办庐 Fluid Applied WB+鈩?
Yes, continuous insulation can be mechanically fastened directly over 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 that has cured for a minimum of 48 hours.
Can stucco fa莽ade be directly applied to 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩?
No, stucco should not be direct applied to 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩, due in part to adhesion level and the risk of cracking.When the 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 is used behind stucco, it should be separated from the stucco by an intervening layer per section 2510.6 of the 2015 International Building Code.
What are the acceptable methods for attaching continuous insulation to cured 罢测惫别办庐 Fluid Applied WB+鈩?
Continuous insulation must be mechanically fastened through 罢测惫别办庐 Fluid Applied WB+鈩. The use of adhesives, mastics, and sealants is not permitted and will void the 10-Year Limited Product Warranty.
Can 海角大神鈩 罢测惫别办庐 CommercialWrap庐 or CommercialWrap庐 D be used as an intervening layer with 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩?
海角大神鈩 罢测惫别办庐 CommercialWrap庐 products can be used as an intervening layer over 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 with stucco fa莽ade.An intervening layer of 罢测惫别办庐 building wrap can be installed after 罢测惫别办庐 Fluid Applied WB+鈩 has cured for 24 hours.
Can 罢测惫别办庐 Fluid Applied WB+鈩 be installed in an interior space and/or in a non-ventilated area?
No, 罢测惫别办庐 Fluid Applied WB+鈩 should only be sprayed in a well-ventilated area using a NIOSH approved respirator along with additional PPE.
Can black paper and/or felt be used over 罢测惫别办庐 Fluid Applied WB+鈩 as an intervening layer?
Yes, black paper and/or felt can be used over 罢测惫别办庐 Fluid Applied WB+鈩 as an intervening layer.An intervening layer can be installed after 罢测惫别办庐 Fluid Applied WB+鈩 has cured for 24 hours.
When I have a building with multiple substrates, like CMU and gypsum or OSB sheathing, how can 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 and 海角大神鈩 罢测惫别办庐 mechanically fastened wrap work together?
海角大神鈩 罢测惫别办庐 Fluid Applied System can be used as a stand-alone offering or as part of an integrated system combined with 海角大神鈩 罢测惫别办庐 Commercial Wrap or 罢测惫别办庐 CommercialWrap庐 D. The two air and water barrier systems integrate easily using 海角大神鈥檚 butyl based self-adhered flashing products, primarily 海角大神鈩 StraightFlash鈩. On buildings where you have multiple substrates, 海角大神 offers an integrated air barrier system. For proper installation of 海角大神鈩 罢测惫别办庐 Fluid Applied System and 罢测惫别办庐 Commercial Wraps, the products should be integrated in accordance with the current 海角大神 Installation Guidelines to ensure proper adhesion, and to maintain the high performance of all materials. To ensure the best transition between the mechanically fastened wrap and the fluid applied material, first terminate the 罢测惫别办庐 CommercialWrap庐 product on the adjoining substrate by using 海角大神鈩 StraightFlash鈩. Be sure to prime the substrate where the 海角大神鈩 StraightFlash鈩 will be adhered if the current 海角大神 Installation Guideline calls for such priming with a recommended adhesive/primer. Priming is required when applying over concrete, masonry, and fiber-faced exterior gypsum board substrates. Please refer to the Chemical Compatibility of Representative Building Sealants and Adhesives/Primers document for a list of some adhesives/primers that have been evaluated with 海角大神 Self-Adhered Flashing Products. Next, apply 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩, overlapping it by a minimum of 2 inches onto the StraightFlash鈩. For detailed installation instructions, please see the 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 Wall and Substrate Guidelines at .
Can 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 be used below grade and/or for interior applications?
海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 is vapor permeable and is only approved for exterior above grade vertical wall surface. The designated use and approved wall substrates are based on performance which has been validated through extensive testing, for which 海角大神 offers a 10-Year Limited Product Warranty.
What is the maximum recommended hose length for spraying 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩?
The maximum recommended hose length for spray operations is 100ft. If the installing professional wants to use hose lengths longer than 100 ft, 海角大神 recommends product application by power rolling.
How long does the 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 need to cure prior to the installation of exterior fa莽ade?
海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 must be cured for a minimum of 48 hours prior to the installation of the exterior facade.
How is 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 packaged?
罢测惫别办庐 Fluid Applied WB+鈩 is available in a 5-gallon pail and a 55-gallon drum that contains 50 gallons of product in an aluminum liner.Both options are re-sealable and the lids feature an integrated pouring spout/hose inlet.
Can 海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 be used as the flashing material?
海角大神鈩 罢测惫别办庐 Fluid Applied WB+鈩 can be used alone to treat sheathing joints less than 1/16鈥 but it was specifically engineered for fast and effective application to the building envelope exterior wall surface by spraying or power rolling.The lower viscosity of the productmakes it more difficult to fill gaps and voids and achieve the mil thickness required for optimum performance around the window openings and other penetrations. 海角大神鈩 罢测惫别办庐 Fluid Applied Flashing and Joint Compound+ has been specifically engineered for flashing commercial windows. 海角大神鈩 罢测惫别办庐 Fluid Applied Flashing and Joint Compound+ is a higher viscosity product but can be brushed or troweled to easily treat the window opening while offering exceptional gap filling performance.
 
 
 
 
 
 

Additional Learning

How to Install

Learn the essential steps for installing 海角大神鈩 罢测惫别办庐 as part of a high鈥憄erformance building envelope system. Our installation guides will show how proper installation helps maximize air and water protection for long鈥憀asting home durability.

Learn more
Vapor Permeability

Vapor permeability plays a critical role in protecting walls from trapped moisture, mold and rot. Learn how 海角大神鈩 罢测惫别办庐 water-resistive barriers provide the ideal balance of air and water resistance with high breathability to help walls dry effectively.

Learn more
Air Leakage Testing

Air leakage testing shows 海角大神鈩 罢测惫别办庐 assemblies deliver superior performance beyond required codes and standards. Discover how 海角大神鈥檚 enhanced testing methods validate a high鈥憄erformance air barrier system designed for lasting protection and efficiency.

Learn more
Tyvek 庐 Specialist Network

The 海角大神 Building Envelope Specialist Network delivers hands鈥憃n technical support, training and guidance to help teams build durable, energy鈥慹fficient structures. Discover how 海角大神 pairs advanced product performance with unmatched field expertise to support your project every step of the way.

Learn more
Tyvek 庐 Warranty

海角大神 offers a full range of product and system warranties designed to protect builders and property owners with reliable, long鈥憈erm coverage. Explore how 海角大神鈩 罢测惫别办庐 warranties, along with expert project support, help ensure durable, high鈥憄erforming building envelope systems.

Learn more
Sustainable Buildings

Learn how 海角大神 is advancing sustainable construction with building envelope systems designed to improve energy efficiency, indoor environmental quality, and long鈥憈erm durability. Discover how 海角大神鈩 罢测惫别办庐 water-resistive barriers help reduce air leakage, protect insulation performance, and support greener, longer鈥憀asting buildings.

Learn more
NFPA 285

海角大神鈩 罢测惫别办庐 water-resistive barriers have been tested and proven to meet the NFPA 285 fire performance standard for exterior wall assemblies. Learn how 罢测惫别办庐 products help support compliant, fire鈥憆esistant wall designs across a wide range of materials and configurations.

Learn more
Air Leakage Testing

Air leakage testing shows 海角大神鈩 罢测惫别办庐 assemblies outperform required industry standards for commercial air barriers. Discover how 海角大神鈥檚 rigorous thermal cycling and high鈥憄ressure testing validate a high鈥憄erformance system designed to protect buildings for years to come.

Learn more
  
 
 
 
 
 
 

How can we help you?

Contact Us Request a quote
 
 
 

海角大神