º£½Ç´óÉñ

Contact Us
Consult with an Expert
Contact Us
Consult with an Expert

º£½Ç´óÉñâ„¢ Tuff-Râ„¢ Polyisocyanurate Insulation

High-Performance Polyiso Foam with Dual Reflective Foil Facers

tuff-r-product-logo-image1.jpg
tuff-r-product-logo-image2.jpg

º£½Ç´óÉñâ„¢ Tuff-Râ„¢ Polyisocyanurate Insulation

High-Performance Polyiso Foam with Dual Reflective Foil Facers

<br /><b>º£½Ç´óÉñâ„¢ Tuff-Râ„¢ Polyisocyanurate Insulation</b> features high performance, high R-value, closed-cell polyisocyanurate foam core boards sandwiched between a choice of durable exterior foil facers. The polyisocyanurate insulation is created by an exclusive free-rise manufacturing process, which produces a uniform, closed-cell foam for better foam quality than conventional restrained rise process. <br /><br /> <b>Tuff-Râ„¢ Insulation</b> helps reduce air infiltration through the wall by covering cracks between the framing members and sealing tightly against the studs. One facer is a continuous sheet of aluminum foil; the other is a durable tri-laminate facer consisting of aluminum foil, kraft and metalized polyester film.
 
 
 
 
 
 

Features & Benefits 

 
 
 

default-features-benifits.png
Ease of Installation
  • Lightweight, easy to handle and install with a utility knife or any sharp blade
default-features-benifits.png
Adaptable and Versatile
  • Come with a choice of durable facers depending on design requirements that can be nailed, stapled or glued.
  • Compatible with most exterior siding treatments; ideal for brick, stone, aluminum, vinyl, wood, composite, fiber cement and stucco.
default-features-benifits.png
High Performance Durability
  • Tri-Plex facers improve shipping, storage and job-site durability; less damage and job-site waste.
  • High R-value provides enhanced thermal efficiency.
  • Facers help reduce air penetration and water vapor intrusion allowing products to be detailed as a weather-resistive barrier.
default-features-benifits.png
Moisture Resistant and UV Stability
  • Helps reduce the potential for condensation within the wall assembly
 
 
 

Specifications

 
 
 

Standard Sizes

Thickness Width Length R-Value Edge Treatment
1/2 in. 4 ft. 8 ft. 3.5 Square Edge
3/4 in. 4 ft. 8 ft. 5.1 Square Edge
1.0 in. 4 ft. 8 ft. 6.8 Square Edge
1 1/2 in. 4 ft. 8 ft. 10.2 Square Edge
2.0 in. 4 ft. 8 ft. 13.5 Square Edge

Note: Please be advised that additional sizes may be available. Availability of all sizes varies by region and is subject to change. For further information, please contact your local º£½Ç´óÉñ Sales Representative or call us at 1-866-338-7668.

 
 
 

Testing

<b>Tuff-Râ„¢ Insulation</b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact º£½Ç´óÉñ at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.

TEST METHOD TEST TITLE PROPERTY RESULTS
FIRE
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials Surface Burning Characteristics1 Flame Spread ≤ 75
Smoke Developed ≤ 450
Core and Finished Product
THERMAL
ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus Thermal Resistance 1 inch @ 75°F mean temp2 6.8 ft2
•h•°F/Btu, R-value, min.
ASTM D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging Dimensional Stability 0.8% linear (length & width)
STRENGTH
ASTM D1621 Standard Test Method for Compressive Properties of Rigid Cellular Plastics Compressive Strength3 20 psi
ASTM C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation Flexural Strength 50 psi
ASTM D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics Tensile Strength 500 psf, min.

1Calculated flammability values for this or any other material are not intended to represent hazards that may be present under actual fire conditions.

2R-value of 1.0-inch of foam measured @ 75°F mean temperature, determined in accordance with ASTM C518 after aging for 90 days @ 140°F.

3Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first.

 
 
 
 
 
 
 
 
 
 
 
 

Code Compliance

<b>Tuff-Râ„¢ Insulation</b> complies with the following codes:

Code Description
US Product Listings & Verifications 2021, 2018, 2015, 2012, and 2009 International Residential Code (IRC)<br>2021, 2018, 2015, 2012, and 2009 International Building Code (IBC) <br>2021, 2018, 2015, 2012, 2009 International Energy Conservation Code (IECC)<br>Intertek ASTM E84 - Spec ID 55745
Regional Code Listings & Reports 2019 California Green Standards Code
US Code Reports ICC-ES ESR-3089
 
 
 
 
 
 
 
 
 
 
 
 

FAQ

Is there a tape that can be used with º£½Ç´óÉñâ„¢ Tuff-Râ„¢ (ci) Polyisocyanurate Insulation?
3M_VentureTape produces a foil tape for use with º£½Ç´óÉñâ„¢ Tuff-Râ„¢ (ci) Polyisocyanurate Foam Insulation. This product is typically available through distributors of º£½Ç´óÉñâ„¢ Tuff-Râ„¢ (ci) Polyisocyanurate Foam Insulation or º£½Ç´óÉñâ„¢ °Õ³ó±ð°ù³¾²¹³æâ„¢ Brand Insulation.

Aluminum Foil Tape 1520 CW NT-

General: °Õ³ó±ð°ù³¾²¹³æâ„¢ Residential Aluminum Tape for use with º£½Ç´óÉñâ„¢ °Õ³ó±ð°ù³¾²¹³æâ„¢ Sheathing Insulation, º£½Ç´óÉñâ„¢ °Õ³ó±ð°ù³¾²¹³æâ„¢ Metal Building Board NH Insulation, º£½Ç´óÉñâ„¢ Tuff-Râ„¢ (ci) Polyisocyanurate Insulation products. The Tape has a 1.2 mil (30 micron), aluminum foil coated film with a cold weather (CW) acrylic adhesive system. This pressure-sensitive adhesive combines high quick stick at low, normal and high temperatures with excellent long-term performance at low temperatures and in high humidity environments.

Temperature Range: -40°F to 250°F (-40°C to 121°C)

Minimum Application Temperature: -10°F (-23°C)

What is the water vapor permeability of the facer on º£½Ç´óÉñâ„¢ Tuff-Râ„¢ Polyisocyanurate Insulation?
The trilaminate facer on Tuff-Râ„¢ Polyisocyanurate Insulation has a water vapor permeability of < 0.03 perms. The product is tested per ASTM E96 (desiccant method), perms of < 0.03.
Can the aluminum foil facers of º£½Ç´óÉñâ„¢ °Õ³ó±ð°ù³¾²¹³æâ„¢ Brand Insulation or º£½Ç´óÉñâ„¢ Tuff-Râ„¢ Polyisocyanurate Insulation be painted?
The facers of °Õ³ó±ð°ù³¾²¹³æâ„¢ Insulation and Tuff-Râ„¢ Polyisocyanurate Insulation can be painted with an industrial-type latex acrylic paint. The facers must be clean and dry before applying paint. Oil-based paints can also be used. Painting °Õ³ó±ð°ù³¾²¹³æâ„¢/Tuff-Râ„¢ foil Facers:

FOIL: Treat surface and prime (optional but recommended). follow paint manufacturer directions for preferred surface preparation, or:

Clean off rolling oils. Clean with mild detergent. Rinse off well and dry before primer, Use industrial type paint and primer for aluminum metal surface such as, Glidden, Sherwin Williams, or equivalent.

What insulation tapes does º£½Ç´óÉñ recommend for foil-faced º£½Ç´óÉñâ„¢ °Õ³ó±ð°ù³¾²¹³æâ„¢ Brand Insulation and º£½Ç´óÉñâ„¢ Tuff-Râ„¢ (ci) Polyisocyanurate Insulation products?
Aluminum foil tapes for º£½Ç´óÉñ foil-faced insulation products have vapor retarder characteristics and provide improved protection against air infiltration when properly applied. º£½Ç´óÉñ offers the following aluminum foil tapes:

(Note °Õ³ó±ð°ù³¾²¹³æâ„¢ / Tuff-Râ„¢ facer surfaces MUST be clean and free of dirt or dust prior to applying tapes - wipe down with damp cloth and dry, then apply tapes)

°Õ³ó±ð°ù³¾²¹³æâ„¢ Aluminum Foil Tape •2.0 mil (50 micron) high-strength aluminum foil with aggressive acrylic adhesive system; suitable for both low and high-temperature applications. Pressure sensitive. •Temperature range: -35°F to 260°F (-37°C to 127°C) •Minimum application temperature: -25°F (-32°C)

°Õ³ó±ð°ù³¾²¹³æâ„¢ White Foil Tape •2.0 mil (50 micron) high-strength white aluminum foil with aggressive acrylic adhesive system; suitable for both low- and high-temperature applications. Pressure sensitive. •Temperature range: -40°F to 250°F (-40°C to 121°C) •Minimum application temperature: -10°F (-23°C) •Conforms well to smooth and embossed surfaces. Designed for use with white acrylic-embossed °Õ³ó±ð°ù³¾²¹³æâ„¢ insulation/finish boards.

What are the ASTM C1289 classifications for º£½Ç´óÉñ polyisocyanurate products ?
The ASTM C1289 classifications for º£½Ç´óÉñpolyisocyanurate products are as shown below:
ASTM C1289 Types Products
Type I, Class I Tuff-Râ„¢ Insulation (< 1')
Type I, Class 2 Tuff-R™ Insulation (≥ 1')
Type I, Class 2 °Õ³ó±ð°ù³¾²¹³æâ„¢ Basic NH Insulation
Type I, Class 2 °Õ³ó±ð°ù³¾²¹³æâ„¢ Heavy Duty Insulation
Type I, Class 2 °Õ³ó±ð°ù³¾²¹³æâ„¢ Light Duty NH Insulation
Type I, Class 2 °Õ³ó±ð°ù³¾²¹³æâ„¢ XARMORâ„¢ (ci) Exterior Insulation
Type I, Class 2 °Õ³ó±ð°ù³¾²¹³æâ„¢ Metal Building Board NH Insulation
Type I, Class 2 °Õ³ó±ð°ù³¾²¹³æâ„¢ White Finish NH Insulation

Type1 - Faced with aluminum foil on both major surfaces of the core foam. Class 1 - Non-reinforced core foam. Class 2 - Glass fiber reinforced core foam. Dimensional stability will be greater than Class 1 when fastened properly. ASTM C1289 Class 2 exceeds Class 1 requirements.

 
 
 
 
 
 
 
 
 
 
 
 

How can we help you?

Contact Us Request a quote
 
 
 

º£½Ç´óÉñ