海角大神鈩 罢丑别谤尘补虫鈩 Basic NH Insulation
Non-Halogenated (NH), High-Performance, Glass-Fiber Reinforced Polyiso Foam Insulation
海角大神鈩 罢丑别谤尘补虫鈩 Basic NH Insulation
Non-Halogenated (NH), High-Performance, Glass-Fiber Reinforced Polyiso Foam Insulation
<br /><b>海角大神鈩 罢丑别谤尘补虫鈩 Basic NH Polyisocyanurate Insulation</b> is a non-structural, rigid board insulation consisting of a glass-fiber-infused, closed-cell polyisocyanurate foam core laminated between 1.0 mil smooth reflective aluminum facers on both sides. As a result, <b>罢丑别谤尘补虫鈩 Basic NH Insulation</b> offers high, long term R-value providing continuous, durable insulation within the building envelope.
<br /><br />
<b>罢丑别谤尘补虫鈩 Basic NH Insulation</b> is engineered to achieve a Class A fire rating, making it suitable for a variety of concealed and exposed applications. It meets the stringent requirements of a flame-spread index of 25 or less and a smoke-developed index of 450 or less. Additionally, it features NFPA 285 tested assemblies, approved for use in Exterior Walls of Types I, II, III, and IV construction, in accordance with Section 2603.5 of the International Building Code.
Features & Benefits
Specifications
Standard Sizes
| Thickness | Width | Length | R-Value | Edge Treatment |
|---|---|---|---|---|
| 1.0 in. | 4 ft. | 8 ft. | 6.6 | Square Edge |
| 1.55 in. | 4 ft. | 8 ft. | 10 | Square Edge |
| 2.0 in. | 4 ft. | 8 ft. | 13.0 | Square Edge |
| 3.0 in. | 4 ft. | 8 ft. | 18.5 | Square Edge |
Note: Please be advised that additional sizes may be available. Availability of all sizes varies by region and is subject to change. For further information, please contact your local 海角大神 Sales Representative or call us at 1-866-338-7668.
Testing
<b>罢丑别谤尘补虫鈩 Basic NH Insulation</b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact 海角大神 at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.
| TEST METHOD | TEST TITLE | PROPERTY | RESULTS |
|---|---|---|---|
| FIRE | |||
| ASTM E84 | Standard Test Method for Surface Burning Characteristics of Building Materials | Surface Burning Characteristics1 | Flame Spread 鈮 25 Smoke Developed 鈮 450 Core and Finished Product |
| UL 1715 | Standard for Safety Fire Test of Interior Finish Material | Fire Progagation - Interior | Pass |
| NFPA 285 | Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components | Fire Progagation - Exterior2 | Pass |
| NFPA 286 | Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth | Fire Progagation - Interior | Pass |
| NFPA 268 | Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source | Ignitabiilty - Exterior | Pass |
| THERMAL | |||
| ASTM C518 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | Thermal Resistance 1 inch @ 75掳F mean temp3 | 6.6 ft2 鈥鈥⒙癋/Btu, R-value, min. |
| ASTM D2126 | Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging | Dimensional Stability | 0.4% linear (length & width) |
| STRENGTH | |||
| ASTM D1621 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics | Compressive Strength4 | 20 psi |
| ASTM C203 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation | Flexural Strength | 50 psi |
| ASTM D1623 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics | Tensile Strength | 500 psf, min. |
| AIR | |||
| ASTM E2178 | Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials | Leakage rates less than 0.0001 L/s/m2 at a test pressure of 75 Pa. |
Pass |
| ASTM E2357 | Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies | Air Leakage | No Leakage |
| WATER | |||
| ASTM E96 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials | Water Vapor Permeance. | 0.01 perm |
| ASTM C209 | Standard Test Methods for Cellulosic Fiber Insulating Board | Water Absorption | 0.1% volume, max. |
| ASTM E331 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference | Water Penetration | Pass |
1Calculated flammability values for this or any other material are not intended to represent hazards that may be present under actual fire conditions.
2See Jensen Hughes engineering judgement
3R-value of 1.0-inch of foam measured @ 75掳F mean temperature, determined in accordance with ASTM C518 after aging for 90 days @ 140掳F.
4Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first.
Code Compliance
<b>罢丑别谤尘补虫鈩 Basic NH Insulation</b> complies with the following codes:
| Code | Description |
|---|---|
| US Product Listings & Verifications | ASTM C1289 - Type I, Class 2<br>2021, 2018, 2015, 2012, 2009 International Building Code (IBC)<br>2021, 2018, 2015, 2012, 2009 International Residential Code (IRC)<br>2021, 2018, 2015, 2012, 2009 International Energy Conservation Code (IECC)<br>2021, 2018, 2015, 2012 International Green Construction Code (IGCC) |
| Regional Code Listings & Reports | 2022 California Green Standards Code<br>California Bureau of Household Goods And Services Directory of Certified Insulation Materials - T 1534 |
| US Code Reports | Intertek CCRR-0440<br>DrJ TER 1506-03 |